User Compensation

1238888

If the SPAT results are higher than the Single Point value printed on your arm, you can run the Arm Compensation command in the Probe Management dialog box.

• Click Arm Compensation.

• Start with the elbow of the ScanArm to one side and press the green Front button.

• Watch the screen and slowly sweep the elbow so that it ends up on the opposite side.

• Slowly sweep the elbow back to the first side.

• Look at the before and after results. Click the Yes button to generate and save a detailed report of the test to a comma-separated values text file (*.csv file), or the No button to save the new arm compensation.

The new arm compensation will remain in your ScanArm until changed or reset. Click the Reset button to restore the FARO Factory compensation.

Repeat SPAT

Repeat the SPAT with the compensation cone or conical socket in a different location. This will verify the new arm compensation.