View Log
|
1238888 |
The Manage Compensation dialog box displays the compensation history of the current probe. You can set to active or delete any previous compensation. You can also copy the compensation values to the Windows clipboard.
Compensation Log dialog box
The previous probe compensations are compared to the current probe:
-
The ΔX, ΔY, ΔZ values are the location of the center of the ball probe in the last joint coordinate system compared to the current probe compensation.
-
The 2 Sigma (2σ) Error value is the deviation of all the points taken during the compensation. In order to pass compensation, this value has to be less than the Single Point Repeatability (SPAT) specification of the
-
See Product Specifications for the specification values of your
-
Select any probe compensation and click Set Active to switch to that compensation.
-
Select any probe compensation and click Remove to delete that compensation.
If you add an extension to the existing tip, the Z value (length of probe) is larger.
Related Information
