Freestyle Processing Settings

1238888

These processing settings are only used for Freestyle scans.

Plane Detection

Switches plane detection on or off for all processing. Auto switches on plane detection only if it was switched on when the scan was created.

Replay

If scans already passed some processing steps, Replay restarts the processing from the beginning. Processing is then executed with higher precision than it was done during capturing.

Scan Optimization

Adjusts all frames of a scan to minimize the overall displacements errors. The function searches for loops in the scan and tries to close those loops. Loop closing is necessary because small errors from frame to frame may accumulate over time, resulting in gaps if you return to the same position again. The Extended setting may give better results, but will take longer.

Stray Point Filtering

Removes stray points, creating a cleaner overall look. Select Standard to remove stray points without additional 3D smoothing. This setting tends to make edges and corners look better. Select Smooth to add additional 3D smoothing. This setting tends to make planes look better.

Color Optimization

Averages the color of scan points in overlapping areas within the selected scan, and adjusts color effects caused by different lighting situations.