General Processing Settings

1238888

On this page you can define general processing settings. These settings are valid for all scanner types.

1. Click the Settings icon on the right side of the workflow bar.

2. Then click Processing and go to the General tab.

Create Scan Point Clouds

If enabled, a scan point cloud for each scan will be created as last part of the processing.

This setting is enabled by default. It is highly recommended to keep this setting enabled.

If you want to create scan point clouds manually: 

1. Right-click the cluster or the scan for which you want to create scan point cloud(s).

2. Select Operations > Point Cloud > Create Scan Point Clouds.