Setting Up Rear View Mirror View in MassZone
You can reflect the scene in the vehicle's mirrors. The mirrors reflect anything in the scene, including point cloud data.
To set up display in mirrors:
1. Select the vehicle to set up.
2. In the tool panel, configure the following:
(A) Enable MZU Driver View.
(B) Enable Preview Driver View.
(C) Click Edit Mirror Properties.
When you enable Preview Driver View any active mirrors display. Active mirrors can be enabled or disabled from the Edit Mirrors Properties dialog.
You can enable up to four mirrors, including:
(A) Driver side
(B) Rear View
(C) Passenger side
(D) Reverse backup display
Adjusting Mirror Settings
Use Mirror properties to configure settings for each mirror:
(A) Select the mirror to edit.
(B) Adjust the mirror. You can edit the following aspects for the mirror:
-
Mirror 3D Offset – Adjust the position of the mirror on the vehicle.
-
Mirror 2D Screen HUD Position – Adjust the position of the mirror on the screen.
-
Tilt and Field of View settings
(C) Check Active to hide or display the reflection in the mirror.
Examples showing mirror views 2 seconds before impact, and at impact.