Setting the Date and Time

123-2024-10-21-888

If the scanner is not switched on for circa 60 days, the system date and time will be lost and must be reset before scanning to ensure that the time and date of all project files and scans is correct.

To change the date and time settings, from the Home Screen, tap Manage > General Settings > Date & Time.

Automatic date and time - Tap and slide to activate automatic date and time settings.

24-Hour Clock - Tap to set the time format. The scanner can display time in either the 24-hour or the 12-hour clock format. Slide to ON to select the 24-hour clock. Slide to OFF to select the 12-hour clock.

Select Date Format - Tap to choose the date format. The currently selected date format is displayed. Select between the date formats DD.MM.YYY, MM/DD/YYYY or YYYY-MM-DD, where YYYY is the year, DD the day and MM the month. The selected format is highlighted.

Select time zone - Tap to select the time zone. The currently selected time zone is displayed.

Change date and time - Tap to set the internal clock. (Only available if Automatic date and time is turned off.)