Regulatory Information

1238888

Regulatory information for the wireless components of the Quantum is listed on the back of the base.

Figure 1-7 Wireless regulatory information label

Bluetooth

FCC ID: Z64-WL1835MOD

IC: 451l-WL1835MOD

MIC: 201-135370

 

DECLARATION OF CONFORMITY

FCC Compliance Statement:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and

  2. this device must accept any interference received, including interference that may cause undesired operation.

Information To The User:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment, this equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment is a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.

  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

  • Consult the dealer or an experienced radio/television technician for help.

CAUTIONAny change or modification not expressly approved by FARO Technologies, Inc. may void the user's authority to operate the equipment.

 

DECLARATION OF CONFORMITY

Industry Canada Statement:

This device complies with RSS-210 of Industry Canada.

Operation is subject to the following two conditions:

  1. This device may not cause interference, and

  2. this device must accept any interference, including interference that may cause undesired operation of the device.

CAUTIONEXPOSURE TO RADIO FREQUENCY RADIATION

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population: consult Safety Code 6, obtainable from Health Canada's website www.hc-sc.gc.ca/rpb

Wireless Local Area Network (WLAN 802.11)

FCC ID: Z64-WL1835MOD

IC: 451l-WL1835MOD

MIC: 201-135370

 

DECLARATION OF CONFORMITY

FCC Compliance Statement:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and

  2. this device must accept any interference received, including interference that may cause undesired operation.

Information To The User:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.

  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

  • Consult the dealer or an experienced radio/television technician for help.

CAUTION Any change or modification not expressly approved byFARO Technologies, Inc. may void the user's authority to operate the equipment.

The WLAN (802.11b/g) can be used concurrently with the USB Device, LAN (Ethernet) and Bluetooth ports. The Bluetooth and WLAN can be disabled by hardware and firmware.

Industry Canada Statement:

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CAUTION EXPOSURE TO RADIO FREQUENCY RADIATION

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population: consult Safety Code 6, obtainable from Health Canada's website www.hc-sc.gc.ca/rpb

To comply with RF exposure requirements all antennas should be located at a minimum distance of 20cm, or the minimum separation distance allowed by the module approval, from the body of all persons.

European Union:

The FaroArm Quantum complies with the protection requirements of the Council Directives 2014/30/EU (Electromagnetic Compatibility), and 2014/35/EU (Low Voltage Directive on Electrical Safety) and 1999/5/EC (R&TTE applies to radio equipment) as per requirements of the laws of the Member States.