Surface Mount Plate Dimensions

1238888

The Surface Mount Plate is used to clamp or bolt the Quantum to a stable mounting surface. It is an assembly of a standard 3½” mounting ring and a FARO -designed base plate.

You can bolt the Surface Mount Plate directly to a surface using the mounting screws in the Accessories Case. Make sure to tighten each mounting screw to 100-inch pounds (11 newton meters).

Figure 2-25 Surface Mount Plate dimensions

You can bolt the 3½” mounting ring directly to a surface using the mounting screws in the Probe case. Make sure to tighten each mounting screw to 100-inch pounds (11 newton meters).

Figure 2-26 Standard 3½” Mounting Ring dimensions