General View Settings

If you click on the right side of the screen, the General View Settings form is opened.

You can define these settings in all views. However, the effect might not be visible in all views. See further explanations below.

Figure 1-36 General View Settings

Show or Hide Elements

Activate the corresponding switch if you want to show or hide waypointsscans or 360° images, annotations, measurements and trajectories.

Deactivate the corresponding switch to hide these elements.

Waypoints Elevation

• Color waypoints by elevation: If you activate the switch, waypoints will be displayed with different colors according to their elevation. Note that this option is only available if the elevation difference is greater than 1 meter.

• Show waypoints on floor: If you activate the switch, waypoints are displayed on the floor with a predefined offset.
  If you deactivate the switch, waypoints are displayed at their actual elevation.

Object Visibility

Use the slider to increase or decrease the distance at which objects, for example annotations and measurements become visible.

Point Cloud Rendering

Use the slider to adjust the visual appearance of point clouds. The following options are available as positions on the slider.

• Smooth (1): Optimized for a smooth fly-through experience. Details may appear blurred and flattened out, especially on SLAM data. Use this option for sparse point clouds.

• Balanced (2): Good fly-through experience. Details appear sharper, especially when more points are loaded.

• Sharp (3): The navigation is smooth. Details are enhanced by outlining them. This option works well for SLAM data.

• Sharpest (4): Maximum sharpness of detail. The fly-through experience is noisy. This option works well for detailed annotations and measurements when the camera is not moving.