General and View-specific Toolbars

1238888

This chapter provides an overview of the toolbars that are visible in the 2D View, the 3D view, the walk mode view as well as on the 3D Model tab.

Views Toolbar

You can find this toolbar on the lower left side of the screen. This toolbar is available in all views:

Changes to the 3D view, see Capture Tab: 3D View.

Default view on opening a project. Changes to the 2D view, see Capture Tab: 2D View.

Changes to the walk mode view, see Capture Tab: Walk Mode.

View Settings and Filter Toolbar

You can find this toolbar on the upper right side of the screen. This toolbar is available in all views.

Define which elements you want to see in the current view. You can switch the visibility for waypoints, annotations, measurements and trajectories on and off. For 3D views, you can also define if you want to see only nearby objects or all objects. For more detailed information, see General View Settings.

Either set specific tag filters or to select only untagged elements. You can set tags in the Project settings by clicking the icon. You can use the tags in annotations. For more information, see Filter for Tags.

You can select the layer you want to see, for example a point cloud, a sheet, etc.

View-specific Toolbar

You can find this toolbar on the middle right side of the screen. The content of this toolbar varies depending on the view that is currently selected. The list below shows the single toolbar buttons with indications in which view they are available.

2D view, 3D view, 3D model. Only possible in the walkmode view if the 360° images have depth information: Make measurements, see Make Measurements in a Project.

3D view: Evaluate flatness and levelness of floors and ceilings as well as plumbness of walls, see

All views, visible only in the 2D view: Make an annotation, see Tags and Annotations.

2D view: Make colored sheet black and white, see Make a Sheet Black and White.

3D view: Create a clipping box with a subvolume of the point cloud for export, see Create a Clipped Subset of a Point Cloud for Export.

2D view, 3D view, 3D model: Create a temporary clipping box, see Create a Clipping Box in a Point Cloud or 3D Model.

3D view, 3D model: Reduce and increase the opacity of the sheet, point cloud and 3D model via the sliders, see Make Point Cloud, 3D Model or Sheet Visible in Your Project.