Registration Report Settings

1238888

On this page, you can define settings for the Registration Report. You can define settings for the following:

Scan Point Statistics, i.e., the references between scan points which are calculated by a top-view-based or a cloud-to-cloud registration

Target Statistics, i.e., references between targets returned by a target-based registration

Thresholds

You can define thresholds as follows:

Values below the first threshold are shown in green, and values above the second threshold are shown in red. Values in-between are shown in yellow. The color codes are used in the Registration Report, the Project Dashboard, and the Scan Managers.

Set specific thresholds by clicking in the field and entering a new value.

For the interactive registration, it is recommended to use the following threshold values:

  • Thresholds for overlap color coding: Set to 5% for Red below and to 20% for Green above. With the default settings a lot of connections between scans would be displayed yellow if the overlap is very low. (If you have previously used the default settings, you must set Red below first, because otherwise, you can't set the Green above value).

  • Thresholds for point error color coding: Use default values of 20 mm for Red above and 8 mm for Green below.