TrackerPad

1238888

Some of the TrackerPad commands are not available when started from FARO CAM2 2021 .

Click TrackerPad to start TrackerPad. In the TrackerPad dialog box, you can:

Initialize - Initialize the Vantage System.
Home - Send the Vantage laser beam to the Tracker Mounted Reset (TMR) or Home position.
Turn Motors On/Off - Switch the Vantage motors on and off.
Turn Tracking On/Off - Switch the Vantage target tracking on and off.
Set Backsight - Switch the Vantage into backsight or frontsight measurement.
Search Target - Initiate a search for a target.
Drive Beam - Drive the laser beam to a specific Location.
Set Distance Mode - Set the measurement distance mode.
Set Target Type - Set the current SMR or target.
Set Weather Configuration - View and configure the weather measurement settings.
Display Bubble Level - View the bubble level.
Set Time - Set the Vantage’s internal Date and Time.
Set Distance - Set the Interferometer base distance - ION models only.
Change Network Settings - Set the Vantage’s wired and wireless IP address.
Release Lock - Temporarily stop the Vantage from tracking the SMR or target.
Probe Management - Manage and compensate the FARO’s removable probe tips.
Find Me On/Off - Switch the Vantage’s Find Me on and off.
Disable/Enable Power Button - Disable the Power On/Off button.
Scheduled Power On - Shut down the Vantage and automatically power on at a specific time in the future.
Follow Me Settings - Switch Follow Me on and off and set the search radius.
Turn WLAN On/Off - Switch the Vantage WLAN transmitter on and off.
Custom Warmup Settings - Set a specific warmup time for the Vantage.
Disable/Enable WLAN Button - Disable and enable the WLAN button.

Figure 10-11 Tracker Pad dialog box